Building and want to make sure the execution matches the building permit?
Required to appoint a responsible engineer for inspection under the regulations?
Want independent engineering oversight throughout construction?
A responsible engineer for inspection is a defined role in the construction process in Israel: an engineer appointed by the permit holder to verify that the construction is actually carried out according to the building permit, the law and the standards - and not just according to what is convenient for the contractor.
At B.R.N. Engineering we act as the responsible engineer for inspection, conduct inspections at the stages that require them and submit the required reports to the local committee - professional, independent oversight that protects the integrity of your project.
A responsible engineer for inspection (responsible for inspection of the execution) is a role appointed by the permit holder as part of the construction process. Their job is to check that the construction actually matches the permit conditions, the law and the regulations, and to submit reports on this to the local planning and building committee.
Two principles are important to stress: first, the responsible engineer for inspection must be an engineer listed in the Register of Engineers and Architects. Second, under the regulations he cannot be the same person who serves as the responsible engineer for the building-frame execution - in order to maintain independent oversight. At B.R.N. Engineering we provide objective engineering inspection throughout all the execution stages.
The inspection verifies that what is actually built matches the approved permit and the plans - from the location and dimensions to the structural details. A deviation from the permit may delay the occupancy of the building.
Beyond the permit, the inspection examines that the construction meets the relevant Israeli standards and the requirements of the law and regulations - the basis for the building being safe and lawful.
There are construction stages that the regulations require to be inspected and reported on. The responsible engineer for inspection is present at these stages and documents his findings.
Because the responsible engineer for inspection is not the one executing the work, he provides an objective second pair of eyes. This is oversight with one goal only - that the construction is done correctly and by the rules.
Consider a scenario from the field: in a construction project, a few "small changes" were made on site at the contractor’s request - the position of a load-bearing element was moved, and an opening was changed from what the permit approved. At the time it seemed negligible, and no one stopped to check against the approved plans.
The problem only emerged at a late stage, before the authorities: the actual construction did not match the permit, and this can delay the completion certificate and the occupancy of the building. Correcting a structural deviation at such a stage is complex, and sometimes requires re-approving what has already been built.
This is exactly the purpose of independent engineering inspection: to catch discrepancies against the permit in real time, while they can still be fixed easily. This process dovetails with structural stability inspection and with close engineering supervision throughout construction.
The guiding principle: the earlier a discrepancy against the permit is found, the easier it is to fix. Orderly engineering inspection throughout construction ensures you don't reach the end of the project with surprises before the authorities.
Building and want independent engineering oversight to verify conformity with the permit? Talk to us:
An in-depth familiarity with the building permit and the approved plans, as the basis for every later inspection.
Defining the construction stages that require inspection and reporting, according to the nature of the project and the requirements.
Examining the actual execution against the permit, the plans and the standards at each of the inspection stages.
Detecting deviations from the permit or the standard and issuing clear correction instructions in real time.
Submitting the required inspection reports to the local committee and keeping the permit holder updated.
Continued oversight until the relevant execution stages are finished, towards obtaining the occupancy approvals.
Two statutory roles that it is important not to confuse - and the regulations even require that they not be the same person, in order to maintain independent oversight:
| Responsible engineer for inspection | Responsible engineer for frame execution | |
|---|---|---|
| Who appoints them | The permit holder | The permit holder or the executing contractor |
| What they are responsible for | That the construction matches the permit, the law and the regulations | That the frame is actually executed correctly, per the design and standard |
| When present on site | At defined inspections throughout construction | At the critical execution stages of the frame |
| Who they report to | Submits inspection reports to the local committee | Signs declarations of responsibility for the frame execution |
| Separation of roles | Cannot be the responsible engineer for the frame execution | Cannot also serve as the responsible engineer for inspection |
Want to understand the parallel execution role? Read about the responsible engineer for frame execution. Note that this statutory inspection differs from supervision on behalf of the developer, which is a contractual control the developer commissions to protect its own interest.
Strict adherence to regulations and regulatory guidelines
Full transparency and precise reporting
Extensive experience in inspection and supervision across various projects
Preventing violations and full conformity with building standards
To arrange a meeting and for independent engineering oversight, talk to us:
We are at your service
Private
Private/Commercial
Private
Private
Private
Private
Private/Commercial
Private/Commercial
Private/Commercial
Private/Commercial
Private
Private
Commercial
Commercial
Private
Private
Private
Private
Private/Commercial
Commercial
Private
This is an engineer appointed by the permit holder to verify that the construction is carried out in accordance with the building permit, the law and the regulations. He conducts inspections at the construction stages and submits reports to the local planning and building committee.
The responsible engineer for inspection is appointed by the permit holder, and must be an engineer (or a technician authorized for simple structures) listed in the Register of Engineers and Architects in the appropriate branches.
No. The regulations explicitly state that the responsible engineer for inspection cannot also be the responsible engineer for the building-frame execution. This separation is intended to maintain objective, independent oversight.
The responsible engineer for inspection is a statutory role that submits reports to the local committee and checks conformity with the permit and the law. Supervision on behalf of the developer is a contractual service the developer commissions to protect its interests and verify that the execution matches the plans. The two roles complement each other.
A discrepancy between the execution and the permit can delay the completion certificate and the occupancy of the building, and sometimes even require complex corrections. The role of the inspection is to identify such deviations early, while they are still easy to fix.
There are defined stages in the construction process that require inspection and reporting. The scope of the inspection is set according to the nature and complexity of the project, and the responsible engineer coordinates the inspection points in advance.
Yes. The reports of the responsible engineer for inspection are part of the documentation the authorities examine in the process of obtaining the occupancy approvals. Proper inspection along the way makes it easier to obtain the approvals at the end.
We recommend getting in touch at the start of construction, so we can accompany the project from the earliest stages. Call 03-563-0000 or leave your details and we’ll get back to you soon.
